Skip to content 
- Home
- Components
- Suspension Forks & Accessories
- Ohlins RXF36 M2 29" Air Suspension Fork
Ohlins
Ohlins RXF36 M2 29" Air Suspension Fork
Ohlins RXF36 M2 29" Air Suspension Fork
The race proven TTX 18 dampening from the DH Race Fork has been reworked for the all new TXF 36 M2 fork to give optimal traction and control on trails and Enduro race courses. The RXF 36 M2 is available as an Air or Coil fork. The TTX 18 cartridge kit featuring trail optimised 18mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The damping adjustment range is set specifically for trail to Enduro race use with 15 clicks of low speed compression and low speed rebound.
For the high speed compression damping you get 3 clicks plus a climb mode setting. The re-tuned twin piston three chamber air spring system allows total air spring tuning from the initial movement through to the bottom out. The tyre clearance has also been improved. The chassis will take up to a whopping 29 x 2.8 and 27.5 x 2.8 as well as 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the race courses.
Features:
- TTX damper technology
- Overall improvements for reducing friction
- Independent spring and damper system
- Retuned air spring system
- Infinite 'ramp up' adjustment with just a shock pump
- 36 mm upper tube diameter
- 44mm short offset and 51mm normal offset available
- Max tyre size 29 x 2.8
Specification
| Travel | 120mm / 140mm / 150mm / 160mm / 170mm |
| Travel Adjustment | Internal - Service & parts required |
| Axle Spacing | 110mm Boost |
| Axle Type | 15mm Floating thru axle |
| Damper Type | Twin tube |
| Spring Type | 3 Chamber air spring |
| Compression Adjustment | High & low speed |
| Rebound Adjustment | Low speed |
| Air Spring Volume Adjustment | Infinite adjustment via 3 chamber air spring |
| Stanchion Diameter | 36mm |
| Stanchion Coating | Hard anodised |
| Offset | 44mm or 51mm |
| Steerer Type | Tapered 1 1/8 - 1.5 |
| Steerer Material | Aluminium |
| Min. Rotor Size | 180mm |
| Max. Rotor Size | 203mm |
